| Data Sheets & Specifications |
 |
PRINT |
Alltek Red Universal 200 Product Information
Alltek Red Fine is a spray applied filler and levelling compound to be used over almost any interior surface to fill cracks, holes
and undulations to improve the surface for final decoration. It can be used on all types of interior building surfaces such as cement
or gypsum plaster, concrete, building boards and old painted surfaces and over other Alltek products.
Alltek Red Fine is normally used as the final coat over Alltek Coarse, Alltek Red Fine is applied as a skim coating over the whole surface.
Alltek Red Fine is supplied ready mixed with no mixing or adding of water required. Alltek Red Fine is water based, non-toxic
and contains no asbestos fibres or other harmful ingredients.
Application is done by spray using a mono pump type spray machine. Apply in one or several coats, with intermittent drying.
Make a first filling of any larger damages and undulations. When used on old painted surfaces ensure that the adhesion of the old
paint is good.
Alltek Red Fine can be sprayed as a decorative textured coating and can on ceilings be left without any further decoration or painting.
Alltek Red Fine can also be diluted with a little water and applied by roller, comb and other modelling tools to achieve a decorative
finish.
Alltek Red Fine conforms, when applicable, to French Standard AFNOR, British Standard BS, American standard ASTM, Swedish Standard
SIS and German Standard DIN.
Alltek Red Universal 200 Product Data
| Article Number |
finestd |
| Standards |
AFNOR/BS/SIS/DIN/ASTM |
| Colour |
white |
| Thickness Per Coat |
> 2mm |
| Packaging |
25-kg plastic bags 40 bags on one pallet |
| Density |
1,75 kg per litre |
| Solid Content |
73% nominal |
| Drying Time |
12 hours per mm with temp +15 rh 75-85% |
| Coverage |
1 litre per square meter and mm thickness |
| Application |
by spray or by hand, do not use/apply when air or surface temperature is below +5oC |
| Clean / Thin |
With water |
| Flashing point - Fire Rating |
None class 0 surface spread of flame |
| Storage |
Frost free and dry 6 months in unopened container |
| Toxicity |
Free from toxic matter |
| General |
Water borne dispersion filler based on calcium carbonate with preservatives and rust inhibitors added. |
Data Sheet Index
|
