PRINT

Alltek Orange Superfine is a very fine graded filler and surfacing material to be used over almost any interior surface to fill cracks, holes and undulations to improve the surface for final decoration. It can be used on all types of interior building surfaces such as cement or gypsum plaster, concrete, building boards and old painted surfaces and over other Alltek products.

Alltek Orange Superfine is normally used as the final coat over Alltek Fine when a very smooth surface is required. Alltek Orange Superfine is applied as a skim coating over the whole surface.

Alltek Orange Superfine is supplied ready mixed with no mixing or adding of water required. Alltek Orange Superfine is waterbased, non-toxic and contains no asbestos fibres or other harmful ingredients.

Application is done by spray using a mono pump type spray machine or an airless spray unit similar to Hemo 10. Apply in one or several coats, with intermittent drying. Make a first filling of any larger damages and holes using Alltek Fine. When used on old painted surfaces ensure that the adhesion of the old paint is good.

Alltek Orange Superfine can be used on semi exterior surfaces with adding of 1 part Portland cement to 3 parts Alltek Orange Superfine with some extra water added for consistency.

Alltek Orange Superfine can be sprayed as a decorative textured coating and can on ceilings be left without any further decoration or painting. Alltek Orange Superfine can also be diluted with a little water and applied by roller, comb and other modelling tools to achieve a decorative finish.

Alltek Orange Superfine conforms, when applicable, to French Standard AFNOR, British Standard BS, American standard ASTM, Swedish Standard SIS and German Standard DIN.