| Data Sheets & Specifications |
 |
PRINT |
Alltek Blue Liesage Product Information
Alltek Blue Lissage is a spray applied filler and levelling compound to be used over almost any interior surface to fill cracks,
holes and undulations to improve the surface for final decoration. It can be used on all types of interior building surfaces such as
cement or gypsum plaster, concrete, building boards and old painted surfaces and over other Alltek products.
Alltek Blue Lissage is normally used as the final coat over coarser grades of Alltek. Alltek Blue Lissage is applied as a skim coating
over the whole surface.
Alltek Blue Lissage is supplied ready mixed with no mixing or adding of water required. Alltek Blue Lissage is water based, non-toxic
and contains no asbestos fibres or other harmful ingredients.
Application is done by spray using a mono pump type spray machine. Apply in one or several coats, with intermittent drying. Make a
first filling of any larger damages and undulations. When used on old painted surfaces ensure that the adhesion of the old paint is
good.
Alltek Blue Lissage can be sprayed as a decorative textured coating and can on ceilings be left without any further decoration or
painting. Alltek Blue Lissage can also be diluted with a little water and applied by roller, comb and other modelling tools to achieve a
decorative finish.
Alltek Blue Lissage conforms, when applicable, to French Standard AFNOR, British Standard BS, American standard ASTM, Swedish Standard
SIS and German Standard DIN.
Alltek Blue Liesage Techinical Data
| Article Number |
lissage |
| Standards |
AFNOR/BS/SIS/DIN/ASTM |
| Colour |
beige |
| Thickness Per Coat |
> 2mm |
| Packaging |
25-kg plastic bags 40 bags on one pallet |
| Density |
1,75 kg per litre |
| Solid Content |
73% nominal |
| Drying Time |
12 hours per mm with temp +15 rh 75-85% |
| Coverage |
1 litre per square meter and mm thickness |
| Application |
by spray or by hand, do not use/apply when air or surface temperature is below +5oC |
| Clean / Thin |
With water |
| Flashing point - Fire Rating |
None class 0 surface spread of flame |
| Storage |
Frost free and dry 6 months in unopened container |
| Toxicity |
Free from toxic matter |
| General |
Water borne dispersion filler based on calcium carbonate and natural fine graded sand with preservatives and rust inhibitors added. |
Data Sheet Index
|
