| Data Sheets & Specifications |
 |
PRINT |
Alltek Blue Course Product Information
Alltek Blue Coarse is a spray-applied filler and levelling for use where thicker layers are required. Alltek Blue Coarse is used over
almost any interior surface to fill cracks, holes and undulations to improve the surface prior application of Alltek Fine. It can be
used on aerated concrete, Ytong Siporex Durox and on rough concrete surfaces in addition to thin joint cement/sandstone/gypsum blocks.
Alltek Blue Coarse is applied as a skim coating over the whole surface.
Alltek Blue Coarse is supplied ready mixed with no mixing or adding of water required. Alltek Blue Coarse i
s waterbased, non-toxic and contains no asbestos fibres or other harmful ingredients.
Application is done by spray using a mono pump type spray machine. Apply in one or several coats, with intermittent drying.
Make a first filling of any larger damages and undulations. When used on old painted surfaces ensure that the adhesion of the old paint
is good.
Alltek Blue Coarse can be used on semi exterior surfaces with adding of 1 part Portland Cement to 3 parts Alltek Blue Coarse with
some extra water added for consistency.
Alltek Blue Coarse can be sprayed as a decorative textured coating and can, when mixed with white Portland Cement be left without
any further decoration or painting.
Alltek Blue Coarse conforms, when applicable, to French Standard AFNOR, British Standard BS, American standard ASTM, Swedish
Standard SIS and German Standard DIN.
Alltek Blue Course Technical Data
| Article Number |
coarse600 |
| Standards |
AFNOR/BS/SIS/DIN/ASTM |
| Colour |
white / off white |
| Thickness Per Coat |
> 4 mm |
| Packaging |
25-kg plastic bags 40 bags on one pallet |
| Density |
1,65 kg per litre |
| Solid Content |
73% nominal |
| Drying Time |
12 hours per mm with temp +15 rh 75-85% |
| Coverage |
1 litre per square meter and mm thickness |
| Application |
by spray or by hand, do not use/apply when air or surface temperature is below +5oC |
| Clean / Thin |
With water |
| Flashing point - Fire Rating |
None class 0 surface spread of flame |
| Storage |
Frost free and dry 4 months in unopened container |
| Toxicity |
Free from toxic matter |
| General |
Water borne dispersion filler based on calcium carbonate and natural sand with preservatives and rust inhibitors added. |
| Safety |
Alkaline, avoid contact with skin or eyes, wash with liberal quantities of water, if in eyes rinse immediately with water and contact your doctor. |
Data Sheet Index
|
