PRINT

Alltek Red Fine Airless is normally used as the final coat over Alltek Coarse, Alltek Red Fine Airless is applied as a skim coating over the whole surface.

Alltek Red Fine Airless is supplied ready mixed with no mixing or adding of water required. Alltek Red Fine Airless is water based, non-toxic and contains no asbestos fibres or other harmful ingredients.

Application is done by spray using an airless piston pump or mono pump type spray machine. Apply in one or several coats, with intermittent drying. Make a first filling of any larger damages and undulations. When used on old painted surfaces ensure that the adhesion of the old paint is good.

Alltek Red Fine Airless Standard can not be mixed with cement and is only intended for use on interior dry surfaces, i.e. not to be used in bathrooms, showers etc.

Alltek Red Fine Airless can be sprayed as a decorative textured coating and can on ceilings be left without any further decoration or painting. Alltek Red Fine Airless can also be diluted with a little water and applied by roller, comb and other modelling tools to achieve a decorative finish.

Alltek Red Fine Airless conforms, when applicable, to French Standard AFNOR, British Standard BS, American standard ASTM, Swedish Standard SIS and German Standard DIN.