| Data Sheets & Specifications |
 |
PRINT |
Alltek Airless Lite Product Information
Alltek Lite airless is a light weigh spray applied filler and levelling compound to be used over almost any interior surface to fill
cracks, holes and undulations to improve the surface for final decoration. It can be used on all types of interior building surfaces
such as cement or gypsum plaster, concrete, building boards and old painted surfaces and over other Alltek products.
Alltek Lite airless is normally used as the final coat over Alltek Coarse. Alltek Lite airless is applied as a skim coating over the
whole surface.
Alltek Lite airless is supplied ready mixed with no mixing or adding of water required. Alltek Lite airless is water based, non-toxic
and contains no asbestos fibres or other harmful ingredients.
Application is done by spray using an airless piston pump or mono pump type spray machines. Apply in one or several coats, with
intermittent drying. Make a first filling of any larger damages and undulations. When used on old painted surfaces ensure that the
adhesion of the old paint is good.
Alltek Lite airless can be sprayed as a decorative textured coating and can on ceilings be left without any further decoration or
painting. Alltek Lite airless can also be diluted with a little water and applied by roller, comb and other modelling tools to achieve a
decorative finish.
Alltek Lite airless conforms, when applicable, to French Standard AFNOR, British Standard BS, American standard ASTM, Swedish Standard
SIS and German Standard DIN.
Alltek Airless Lite Product Data
| Article Number |
liteal |
| Standards |
AFNOR/BS/SIS/DIN/ASTM |
| Colour |
white |
| Thickness Per Coat |
> 2mm |
| Packaging |
15 litre plastic bags 40 bags/pallet or 15 litre plastic bucket 33 buckets/pallet |
| Density |
1,1 kg per litre |
| Solid Content |
59% nominal (by weight) |
| Drying Time |
12 hours per mm with temp +15 rh 75-85% |
| Coverage |
1 litre per square meter and mm thickness |
| Application |
by spray or by hand, do not use/apply when air or surface temperature is below +5oC |
| Clean / Thin |
With water |
| Flashing point - Fire Rating |
None class 0 surface spread of flame |
| Storage |
Frost free and dry 1 year in unopened container |
| Toxicity |
Free from toxic matter |
| General |
Water borne dispersion filler based on calcium carbonate and lightweight fillers with preservatives and rust inhibitors added. |
Data Sheet Index
|
